
These two things don't always go together to well. Why, you ask? In order to answer this question you have to get back to some bare bones tuning. This is the key to good broadhead groups no matter which head that you choose to launch at a critter.
Is your bow tuned properly? How well do your arrows equipped with field points group at 40 yards? Do they group at 50 yards and how large is it?
The old standard was approximately 9" at any given distance. Let me explain. Have you ever heard the expression, "I can hit a pie plate at 30 steps and that's good enough for me!" Well, it's not good enough for me and shouldn't be your standard either.
Can you can shoot a group of 6 arrows at 30 yards into a 5" circle? Why not? This should be a bare minimum for your groups. Ideally, a 5" group at 50 yards should be your goal. Yes, it takes a lot of practice and requires that your bow be tuned perfectly but the game that you are hunting deserves it.
I would recommend taking your bow to a professional and having it setup and tuned correctly. Let me make myself clear on this. After someone tunes your bow, they should spend a few minutes with you to be sure that it will punch a perfect hole in a piece of paper with you shooting the bow. I should warn you that this does not mean that your broadheads will fly correctly but you will be off to a good start.
Second, I would like to point out that most bowhunters are do-it-your-selfers. If you are one of these people by all means continue reading. After shooting a group of arrows with field points at 20-40 yards, pay special attention to arrow flight and your groups in the target. If they are tight and your arm is up to it, fling some broadheads. How is the grouping? Not so good? Then you will need to continue reading. If they are good, stop here and get off of the computer and go shoot some more.
I have used this link to the Easton Tuning Guide in a previous post and consider it a valuable tool in tuning my bow. http://www.willowcreekarchery.com/Easton-arrow-tuning_guide.pdf After downloading go to page 11 for broadhead tuning.
After you complete the tuning of your bow to your broadheads you will find that almost every head will fly good. Here is the exceptions. Yes, there is almost always an exception.
- When trying a different head, check the alignment.
- If shooting expandable heads, use a bread tie or a very small piece of wire so that it will not open during flight. Also this will stop them from opening in the target and saves on replacement blades.
- Test every head that you have. I have found only one brand broadhead that would not group with all of the others. Hint: One of the most popular on the market for years.
OK. Now that you are armed with the knowledge, go try it out!
No comments:
Post a Comment